VERIFIED
E06 means the dishwasher is not receiving the expected door-state signal. Start with closure and latch-area checks that do not bypass the interlock.
When a Bosch dishwasher reports E06, the verified technical meaning is door-sensor circuit fault. Use the code to narrow the diagnostic direction, then confirm the full E-Nr before drawing a parts-level conclusion.
Reading the E06 warning correctly
The technical anchor for this record is door-sensor circuit fault. Keep that meaning tied to the exact dishwasher platform. The code identifies a condition detected by the control system, while the full model number and the behavior immediately before the warning help determine the actual repair path.
How the machine may behave
- the dishwasher may refuse to start
- a running cycle can stop unexpectedly
- the control may behave as though the door is open
- E06 may return even when the door appears fully closed
Systems a technician may need to consider
- the door not reaching its expected closed position
- a latch or door-sensor circuit fault
- wiring or control problems in the door-state path
What you can verify without opening the machine
- Remove any rack, pan, utensil, or tall item that prevents the door from closing naturally.
- Inspect the visible latch area for debris or obvious obstruction without removing panels.
- If Bosch permits it, perform one standard reset after confirming normal closure. Never bypass or hold the door switch closed manually.
When to stop
Do not defeat the door interlock. Stop use if there is visible latch damage that prevents secure closure or any electrical warning sign.
When model-specific diagnosis becomes useful
If the door closes normally and E06 still returns, the latch/sensor circuit, wiring, alignment, or control input needs diagnosis.
Model note
Use the complete Bosch E-Nr/model number from the rating label. Do not assume that another Bosch dishwasher with the same exterior design uses the same internal components or diagnostic sequence.
FAQ
Yes, if it physically prevents the door from reaching the proper closed position. Remove the obstruction and close the door normally.
No. The interlock is a safety device and should never be bypassed.
No. The sensor circuit, wiring, alignment, and control input can all be relevant.
Confirm the racks are fully seated, the door closes without force, the latch area is clear, and record whether E06 appears before or during a cycle.
Need diagnosis in the Bay Area?
Still seeing E06 on your Bosch dishwasher?
If the warning remains active or comes back after the appropriate safe checks, request Bosch dishwasher diagnosis in the San Francisco Bay Area. Include the full E-Nr, the exact code, what the dishwasher was doing when it appeared, and your service ZIP code.
Technical source: https://www.bosch-home.com/us/owner-support/error-codes/dishwashers
Model compatibility: Bosch reuses codes across series and model years, so E06 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.