VERIFIED
E14 points to the dishwasher fill path or flow measurement. Start with household water supply and visible inlet-hose checks.
Bosch dishwasher code E14 directs attention to flow-meter or water-filling system fault. The most useful first step is to preserve the exact display and model information, because similar-looking Bosch machines can use different hardware and control logic.
What the dishwasher is reporting
The technical anchor for this record is flow-meter or water-filling system fault. Keep that meaning tied to the exact dishwasher platform. The code identifies a condition detected by the control system, while the full model number and the behavior immediately before the warning help determine the actual repair path.
Useful symptoms to record
- the dishwasher may not fill normally
- the cycle can stop near the beginning
- you may hear repeated attempts to take in water
- E14 may return on the next cycle
Possible fault paths
- restricted or unavailable household water supply
- a kinked or damaged inlet hose
- a flow-meter, inlet-valve, sensing, wiring, or control fault
Safe first observations
- Confirm the dishwasher water shutoff is fully open.
- Inspect the visible inlet hose for kinks, crushing, or obvious damage.
- Note any recent plumbing or installation work that may have changed water supply.
- Do not open the inlet valve or internal flow-meter circuit as a homeowner step.
When to stop
Turn off the water supply and stop using the dishwasher if there is active leaking.
Why the next step may be service
If household supply and visible hose routing are normal but E14 returns, the fill valve, flow measurement, sensing, wiring, and control path need model-specific testing.
Model note
Use the complete Bosch E-Nr/model number from the rating label. Do not assume that another Bosch dishwasher with the same exterior design uses the same internal components or diagnostic sequence.
FAQ
A restricted or unavailable water supply is part of the external fill path, so confirming the shutoff valve is open is a sensible first check.
Yes. A crushed or sharply bent inlet hose can interfere with normal filling.
No. The verified meaning covers the flow-meter or water-filling system, so multiple parts of the fill path may need diagnosis.
Tell the technician about plumbing work, a new disposal or sink installation, dishwasher relocation, or any change in water pressure noticed around the same time.
When to request Bosch dishwasher service
Still seeing E14 on your Bosch dishwasher?
If the warning remains active or comes back after the appropriate safe checks, request Bosch dishwasher diagnosis in the San Francisco Bay Area. Include the full E-Nr, the exact code, what the dishwasher was doing when it appeared, and your service ZIP code.
Technical source: https://www.bosch-home.com/us/owner-support/error-codes/dishwashers
Model compatibility: Bosch reuses codes across series and model years, so E14 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.