VERIFIED
Bosch range ER13 is associated with electric-cooktop control invalid EPROM data. Review symptoms, model details, and safe external checks before deciding on the next step.
If ER13 appears on a Bosch range, the verified technical anchor is electric-cooktop control invalid EPROM data. Similar Bosch product generations can differ internally, so preserve the model number and symptom sequence before resetting anything.
Treat the warning as evidence, not a complete repair instruction. Keep the troubleshooting boundary outside protected systems and do not bypass safety devices to clear a code.
At a glance
- Code: ER13
- Appliance: Bosch Range
- Verified meaning: electric-cooktop control invalid EPROM data
- Primary diagnostic direction: the electronic control path
- Service-area context: San Francisco; confirm coverage by ZIP code
What the control is reporting
The verified technical anchor for ER13 is electric-cooktop control invalid EPROM data. Preserve that meaning in the factual layer. The warning points the diagnostic path toward the electronic control path, while the exact model and symptom pattern determine how that information should be applied.
What can happen while the code is active
Before changing settings or cycling power, note the behavior you can see or hear:
- Controls might be unresponsive or inconsistent.
- The appliance may halt before completing the selected function.
- A code may reappear immediately after startup.
- One feature may fail while others remain available.
What may be causing it
The source record supports considering the following possibilities without treating any single one as confirmed:
- A fault within the control-board electronics.
- Memory or configuration data outside the expected state.
- A relay or electronic switching fault.
- Wiring, supply, or a connected load affecting the control.
What you can verify externally
- Write down the exact display and full model number.
- Keep the control surface clean and dry where touch controls are involved.
- Follow one normal manufacturer-approved power reset when there is no sign of electrical damage.
- Avoid replace a control board from the code alone.
These checks are intended to gather useful information without exposing live wiring, bypassing an interlock, defeating a leak-protection device, opening a sealed system, or using undocumented service modes.
When continued operation is not appropriate
Stop immediately for smoke, burning odor, sparking, visible electrical damage, or repeated breaker trips.
When external checks are no longer enough
If the warning comes back, the control board, connected loads, wiring, supply, and configuration need platform-specific testing. The useful service history includes when the code appears, whether it is repeatable, and what changed immediately before it.
For a service request, include what the appliance was doing immediately before the warning and which external checks were already completed.
Why the full Bosch model/E-Nr matters
The complete rating-label model matters. A code meaning documented on one Bosch range platform should not be assumed to apply to every generation without verification.
FAQ
For this record, ER13 is associated with electric-cooktop control invalid EPROM data. The exact model/E-Nr still matters because Bosch can use different hardware and diagnostic logic across product families.
Only if no safety stop condition is present and the appliance is otherwise operating safely. If the code repeats, performance is abnormal, or there is leaking, smoke, electrical odor, sparking, overheating, or repeated breaker trips, leave the appliance off.
Use only a normal reset that Bosch documents for the exact model. If the warning returns, repeated resets are not a substitute for diagnosis.
No. The code identifies a detected system condition. Model information, symptoms, and model-specific testing are still needed before a component is selected.
Have the full Bosch model/E-Nr, the exact ER13 display, the cycle stage or operating state where it appears, the visible symptoms, and the external checks already completed.
Bosch service in the San Francisco area
Need model-specific diagnosis for ER13?
If ER13 remains active or comes back, request Bosch range diagnosis for the San Francisco service area. Include the complete model/E-Nr, exact code, symptom summary, and ZIP code so service coverage can be confirmed.
service notice: This site represents an appliance repair service and is not affiliated with or endorsed by Bosch.
Technical source: https://mypros.plus/error-codes/bosch/range
Model compatibility: Bosch reuses codes across series and model years, so ER13 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.