VERIFIED
Bosch refrigerator E07 is linked with freezer evaporator temperature-sensor fault on legacy platforms. Review the visible symptoms, model details, and safe external checks before deciding on the next step.
When a Bosch refrigerator displays E07, the control has registered freezer evaporator temperature-sensor fault on legacy platforms. That directs attention toward the heating and temperature-control system, but the exact model/E-Nr and symptom pattern are still needed before choosing a repair path.
Treat the warning as evidence, not a complete repair instruction. Do not bypass interlocks, leak protection, electrical safeguards, or sealed systems just to clear the display.
At a glance
- Code: E07
- Appliance: Bosch Refrigerator
- Verified meaning: freezer evaporator temperature-sensor fault on legacy platforms
- Primary diagnostic direction: the heating and temperature-control system
- Service-area context: San Francisco; confirm coverage by ZIP code
What the warning means
The verified technical anchor for E07 is freezer evaporator temperature-sensor fault on legacy platforms. Preserve that meaning in the factual layer. The warning narrows the diagnostic path toward the heating and temperature-control system, while the exact model and symptom sequence determine how that information should be applied.
Symptoms worth recording
Before changing settings or cycling power, record the behavior you can see or hear:
- The control may receive an impossible or missing reading.
- Temperature or cycle behavior may become inconsistent.
- The appliance can stop a program as a protective response.
- The same code can return immediately after startup.
Possible causes from the source record
The source record supports considering the following possibilities without treating any single one as confirmed:
- A failed sensor or probe.
- Damaged sensor wiring.
- A loose or corroded connector.
- An electronic input fault on the control board.
First steps that stay outside the appliance
- Write down the full code and model number.
- Verify only external conditions that can affect the reading, such as a properly closed door or unobstructed user-accessible area.
- Avoid probe internal sensor circuits while the appliance is energized.
These checks are for information gathering only. Do not expose live wiring, bypass an interlock, defeat leak protection, open a sealed refrigeration circuit, or use undocumented service-mode procedures.
When to stop using the appliance
Stop for overheating, electrical damage, gas odor, or water near electrical parts; otherwise avoid repeated operation if the sensor is required for safe temperature control.
When diagnosis becomes the next step
The sensor, wiring, connector path, and control input must be tested against the documentation for the exact model before a part is selected. A displayed code is evidence, not a parts order. The next step is to confirm the reported system against the model and the symptoms present during operation.
For a service request, include what the appliance was doing immediately before the warning and which safe checks were already completed.
Why the full Bosch model/E-Nr matters
The complete rating-label model matters. A code meaning documented on one Bosch refrigerator platform should not be assumed to apply to every generation without verification.
FAQ
For this record, E07 is associated with freezer evaporator temperature-sensor fault on legacy platforms. The exact model/E-Nr still matters because Bosch can use different hardware and diagnostic logic across product families.
Only if no safety stop condition is present and the appliance is otherwise operating safely. If the warning repeats, performance is abnormal, or there is leaking, smoke, electrical odor, sparking, overheating, or repeated breaker trips, leave the appliance off.
Use only a normal reset that Bosch documents for the exact model. If the warning returns, repeated resets are not a substitute for diagnosis.
No. The code identifies a detected system condition. Model information, symptoms, and model-specific testing are still needed before a component is selected.
Have the full Bosch model/E-Nr, the exact E07 display, the cycle stage or operating state where it appears, the visible symptoms, and the external checks already completed.
Bosch service in the San Francisco area
Still seeing E07?
If E07 remains active or comes back, request Bosch refrigerator diagnosis for the San Francisco service area. Include the complete model/E-Nr, exact code, symptom summary, and ZIP code so service coverage can be confirmed.
service notice: This site represents an appliance repair service and is not affiliated with or endorsed by Bosch.
Technical source: https://www.bosch-home.com/us/owner-support/error-codes/refrigeration/
Model compatibility: Bosch reuses codes across series and model years, so E07 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.